Servo Fanuc

※ Download: Fanuc 31i руководство

Call me to set up an evaluation: Heinz at 614-888-8466. When replacing the fan motor, be careful about the direction of the fan motor air blow direction , the direction of the connector, etc. Be sure to push the face plate as far as it will go. Check whether the spindle also vibrates when the motor is turning by inertia.

Such work must be done only by a person trained in the maintenance of the machine or equipment. Ready status The servo motor is excited. However, we cannot describe all the matters which must not be done, or which cannot be done, because there are so many possibilities.

Servo Fanuc - This alarm may be displayed if one of the connectors for connection between the control printed-circuit board and power printed-circuit board is detached.

KHOAN FANUC ROBODRILL (FANUC 31I)
This means that this alarm is not issued when a semi-full is used. If a power line is detached due to a failure in crimping or soldering, or a conductive area is exposed due to a failure in shell assembly, you may get electric shocks. Cause of trouble Check method Action 1 The cable is incorrect. A motor is heavy, so that if you lift a motor by hand, you may be exposed to various risks. Dew condensation is likely particularly when the cooling unit continues to run after the machine is stopped. The users are also requested to read an applicable specification manual carefully and understand each function of the motor or amplifier for correct use. For insulation resistances, see the following table. For the items specific to a particular motor model, see one of the subsequent subsections that pertains to that particular motor model.